Buying a Balboa Spa Pak for Your Hot Tub

Balboa spa packThe spa pack in your hot tub is basically the guts of its entire mechanical and electrical working systems. You can typically expect a spa pack to last about 8 to 10 years. Considering the fact that the average spa shell lasts at least 30 to 40 years, spa owners will most likely have to replace their spa paks at least once or twice – if not more – during the life of the hot tub.

You don’t necessarily have to buy the exact same spa pak that you had when you first bought your hot tub. In fact, there are other options available when it comes time for replacement, rather than get a highly marked up pack and service from your spa dealer.  The main manufacturer of spa packs in the world is Balboa. The majority of hot tub manufacturers don’t make their own spa paks, but buy them from a manufacturer that specializes in these products. You just need to order the one that fits based on the pumps and features in your hot tub.

Make Sure to Use the Latest Technology

Your best bet when it comes to replacing your spa pak is to take advantage of the latest, most innovative technology. Manufacturers of these components are constantly trying to improve the design of these paks in order to make their functionality as efficient and effective as possible. That’s why it’s wise to buy Balboa spa pak for your hot tub, as this brand is considered to be among the best in the world of hot tubs.

By the time your spa pak fails, you probably won’t be able to find the exact same model or brand at the time of replacement. It’s most likely been replaced by a newer design, which in essence puts the hot tub owner at an advantage.

Major Components of Spa Paks

Typically, you’ll see the following as part of a spa pack:

  • Controller
  • Heater
  • Pump
  • Blower

hot tub Balboa spa packTo buy a Balboa spa pack, look no further than The Hot Tub Outpost! They have  a large online selection of spa packs in all major brands including Balboa, Waterway and CTI, to name a few.

Save time and money buying all of your hot tub parts and accessories online with Hot Tub Outpost.  Their website also offers handy guides for water maintenance and getting the most out of your hot tub. You can find a full set of spa replacement parts including filters, covers, chemicals, steps and more.  Choose from a wider selectionand  never pay retail again!  Visit www.HotTubOutpost.com for all your hot tub needs.

Water Problems in a Hot Tub

hot tub spa chemicalsGeneral water problems in a hot tub can be avoided by being sure there is enough sanitizer in the water (bromine or chlorine – never mix the two) and that the pH level is between 7.2-7.6. A water test kit or test strips can be used to monitor hot tub water health.

If water problems such as foaming, bad smell and cloudiness occur, it is important to understand some basics so the treatment does not increase the problem.

First of all, hot water scents and aromatherapy fragrances should not be used to mask hot tub odors that may be caused by poor water chemistry as the problem is still there and can be addressed head on by using a shock treatment in the water with a non-chlorine shock.

Similarly, foam problems are not solved by a de-foaming. These products can reduce the foam in the spa so it can be used, but the underlying problem of why the spa is foaming needs to be addressed.  Are bathing suits or hair full of shampoo, soaps or oils?  If so, it is best to shower off before getting into the spa.

Foaming is a result of poor pH (outside the ideal range of 7.2-7.6) but also too many TDS or total dissolved solids in the water.

There are products that bind/coagulate particulates in the water so that they can end up in the filter.  See Hot Tub Outpost for details on the right hot tub chemicals for your spa.

To maintain a hot tub, you will need to regularly test the water.

Having a dirty filter puts a lot of stress on the pump. The pump has to work a lot harder to pull water through the filter.  Cleaning a filter and switching it out is a better way to keep the chemicals working right and also more economical.

The pH is important in the spa and should be held between 7.2-7.6.

Check the water 3x a week using the Monday-Wednesday-Friday hot tubwater care program at Hot Tub Outpost.

hot tub chemicalsFor sanitizer, either chlorine or bromine is used.

A pre-filter can also help eliminate contaminants and take out rust and iron while refilling the spa before it gets in the hot tub water in the first place.

Replacement spa filters are available at www.HotTubOutpost.com.

Buy Spa Filters Online For Ultimate Convenience

Spending a few minutes in your very own hot tub can do wonders for your body and your stress levels. Studies have shown that hydrotherapy sessions provided by spas can truly have a significant positive impact on your physical and mental health. In order to maximize the enjoyment you get from your spa, it is essential to keep all of its components in good working order. There will be times where certain components may have to be repaired or replaced based on the age and usage of your spa. One of the more important components is your hot tub’s filter, which should be replaced every year or so. When it’s time for replacement, buy spa filters online for the ultimate in convenience.

The filter system of your spa is one of the most important features of your tub, as it is greatly responsible for keeping the water clean and clear of all dirt, grime, debris and bacteria that may enter the spa water. Without a properly functioning filter, your spa runs the risk of being contaminated with harmful substances that render the spa water unsafe for occupancy.

When it’s time to buy spa filters online, consider your options. There are essentially 3 types of filters you can purchase:

1) Diatomaceous earth filter – These are also known as “green” filters since they are environmentally friendly, are non-polluting and are able to capture even the tiniest microorganisms found in the earth. These filters have a very fine mesh which allows it to capture these super tiny particles.

2) Sand filter – This is a rather common filter which extracts impurities from the spa water by using sand to collect this dirt and debris. These filters use a backwashing mechanism to eliminate the dirt from the water.

3) Cartridge filter – This is probably the most common filter which runs at low pressure, and allows for more water flow and turnover of water.

Most spas come with cartridge filters and there are many shapes and sizes. Buying cartridges from the spa manufacturer can be very pricey. The same basic filters are available from filter manufacturers and you can usually find the right one to fit any well-known brand of spa. Whichever filter you choose, consider shopping online with a credible online source like HotTubOutpost.com, who have been in business for years and have a fabulous track record at supplying customers with top quality products at factory direct prices. Visit their online showroom today and select the appropriate filter for your spa.

Discount Hot Tub Filter Sale

Discount Hot Tub Cartridge Filters
Discount Hot Tub Filters Online
Discount Hot Tub Filters Online

Hot tub filters are often overlooked until they are almost completely disintigrated and cracked.  In the mean time, the spa plumbing, heater and other components were not getting the full benefit of clean water passing through the filter.  In extreme cases, the water pressure drops at the heater and a FLO problem occurs. Also pump seals can wear, causing a leaky pump.

Unnecessary maintenance issues like these can be prevented with routine filter maintenance.  Regular washing between the pleats to clean the filter media will help extend the life of paper cartridge filters.  At one point, usually every year to year and half, the filter should be replaced. 

Low priced filters are available online that are compatible with most any spa.  Knowing a Pleatco or Unicel reference number will help assure the filter bought online will fit and work.  Sometimes this number is stamped on the endcap of the filter, or the manufacturer can tell the customer what filter model it is. Otherwise, taking measurements of the filter is a sure way to find a suitable replacement online.

How to measure a cartridge filter for replacement?  Take the length of the filter and measure the width. Then measure the center hole diameter and make note of any obstructions such as solid end caps instead of ones with holes in them, bulging endcaps or strings and handles on one side. Some filters also have a threaded side that screws into the filter canister instead of most filters that just have a round hole going all the way through the filter center.

With filter measurements in hand, compare the dimensions to ones found online and make note of the Unicel reference number for easier shopping next time. Find the best deals on replacement spa filters at TheHotTubSuperstore.com or see the page on Best places to find a discount hot tub filter online.

Happy Tubbing!